July 27, 2010 1:05 PM
Mantis Hardware / Software Trial Run
by Anna Kaziunas FranceAfter we put the spindle together - Shawn and I tested the Mantis to see if it would respond to commands. It looks like Fab Academy AS220 (with a huge effort on Noah’s part) put machine together properly.
The Mantis responded to the following commands (see screenshots) and responded well. The next step is to figure out how to feed an .rml file into the software. (in progress). After that we need to mill a board on the Mantis and see how it turns out.
Projects
- Laser Cut Cards - Construction Kit by Anna Kaziunas France
- MAKE blog post #1: Make a Press-fit Construction Kit by Shawn Wallace
- NIK by Noah Bedford
- Press-fit construction by Elliot Clapp
- Lasercutting! by Jenine Bressner
- Hey FabFolk! It's # 4 :) by Makeda Stephenson
- Sunglasses by Noah Bedford
- FabISB Round 2: Stuffing and Programming the Board by Anna Kaziunas France
- Electronics design and production by Noah Bedford
- Breadboard-friendly Attiny45 board by Shawn Wallace
- A soldering video tutorial by Jenine Bressner
- Fab ISB - Round 1: Milling Out The Board by Anna Kaziunas France
- Second article for MAKE Blog by Shawn Wallace
- Hello circuits by Elliot Clapp
- Shopbot Project - Modular Shelving by Anna Kaziunas France
- Big pile of crap by Noah Bedford
- Make something (anything) big by Makeda Stephenson
- Shelves from the Shopbot by Jenine Bressner
- Make it Big(ish) by Elliot Clapp
- Complete and Working --> Modified Hello Echo + Button + FTDI v.2 by Anna Kaziunas France
- Modified Hello Echo + Button + FTDI v.2 ---> In Progress by Anna Kaziunas France
- Modified Hello Echo + Button + FTDI v.1 by Anna Kaziunas France
- Hello Serial Echo by Anna Kaziunas France
- Hello FTDI Step Response by Anna Kaziunas France
- Making Programming, Connector and Serial Cables by Anna Kaziunas France
- Re-Programming the Echo Board by Elliot Clapp
- Persistence of Vision by Jenine Bressner
- Completed TARDIS Cast | Working Light by Anna Kaziunas France
- TARDIS: Moldmaking by Anna Kaziunas France
- 3-D modeling for molding and casting by Jenine Bressner
- Molding and casting a flexible coupling part 2 by Noah Bedford
- Molding and casting a flexible coupling by Noah Bedford
- Monkeys on typewriters by Shawn Wallace
- Molding and casting by Makeda Stephenson
- Moon Crater by Elliot Clapp
- TARDIS: 3D Modeling by Anna Kaziunas France
- Very Basic Beginner Assembly Tutorial III: How to Use Avrdude by Anna Kaziunas France
- Very Basic Beginner Assembly Tutorial II: How to Use Gavrasm to compile an .asm flie by Anna Kaziunas France
- Very Basic Assembly Tutorial I: Where to Get Gavrasm for the Mac OS by Anna Kaziunas France
- Final Project Plan: PuppetMaster Universal Remote by Anna Kaziunas France
- New bazaar tutorial by Noah Bedford
- Intro to Bazaar by Noah Bedford
- First 3D Scans - Modela Scan of Laughing Die and Shell by Anna Kaziunas France
- Interlocking Rings - 3D Printing by Anna Kaziunas France
- MakerBot Cupcake CNC- Assembling the Plastruder mk4 Spindle by Anna Kaziunas France
- Half drill bit! by Noah Bedford
- F(l)uxamascanner by Elliot Clapp
- Picza by Noah Bedford
- Capacitive Sensing - PuppetMaster v.1-v.2 by Anna Kaziunas France
- Hello FTDI Step Response by Anna Kaziunas France
- Levitating Elephant by Noah Bedford
- Servo motor mosh by Jenine Bressner
- Motion Sensing Glow Skull by Anna Kaziunas France
- The Gellerizer by Elliot Clapp
- Processing by Jenine Bressner
- Levitating Elephant by Noah Bedford
- Using a GUI to Control Processing Output with ControlIP5, Firmata via Serial by Anna Kaziunas France
- Pure Data Frequency Modulator by Elliot Clapp
- DIY hobo game controllers by Shawn Wallace
- My favorite python/GTK reference by Noah Bedford
- Internet 0 by Jenine Bressner
- Internet 0 / Zero - Milling, Stuffing & Setting Up the Boards by Anna Kaziunas France
- XBee Networking by Elliot Clapp
- XBee Networking by Elliot Clapp
- Mantis Hardware / Software Trial Run by Anna Kaziunas France
- Spindle Assembly - Mantis Milling Machine by Anna Kaziunas France
- The Mantis by Shawn Wallace
- Machine button interface by Shawn Wallace
- Super simple bootstrap 3-axis controller by Shawn Wallace
- Diploma Completion Checklist Update - 08.14.2010 by Anna Kaziunas France
- Final Project Licencing and Distribution by Anna Kaziunas France
- Final Project Plan: PuppetMaster Universal Remote by Anna Kaziunas France
- Licensing by Noah Bedford
- Puppet Master Final Project Page Updated by Anna Kaziunas France
- [Revised] Fab Academy Final Project Proposal: PuppetMaster by Anna Kaziunas France
- The world is broken by Noah Bedford
- Final project notes by Noah Bedford
- Final project progress by Noah Bedford
- Puppet Master Final Project Page Updated by Anna Kaziunas France
- Unsuccessful Modela Troubleshooting - Partially Successful Switch to Roland Vinyl Cutter by Anna Kaziunas France
- Capacitive Sensing - PuppetMaster v.1-v.2 by Anna Kaziunas France
- [Revised] Fab Academy Final Project Proposal: PuppetMaster by Anna Kaziunas France
- Final Project Licencing and Distribution by Anna Kaziunas France
- PuppetMaster Final Project Page by Anna Kaziunas France
- Encoded Building Materials with Computer Numerical Control Assembly by Makeda Stephenson
- Final Project Plan: PuppetMaster Universal Remote by Anna Kaziunas France
- Towards the final project by Jenine Bressner
- Final project notes by Noah Bedford
- Final Project Progress by Elliot Clapp
- Servo motor mosh by Jenine Bressner
- Working outside the lab, but making progress by Jenine Bressner
- Year-long Project by Elliot Clapp
- Coil wrapping machine by Shawn Wallace
- On Self-Replication by Anna Kaziunas France
- FTDI header for .cad by Noah Bedford
- Tintin Rocket (neko-wa kowaii) by Noah Bedford
- Fluxamacutter press-fit DIY vinyl cutter by Shawn Wallace
- Lasercutting! by Jenine Bressner
- Kamina glasses by Noah Bedford
Links
Recent entries
Puppet Master Final Project Page Updated
Shopbot Project - Modular Shelving
Diploma Completion Checklist Update - 08.14.2010
Unsuccessful Modela Troubleshooting - Partially Successful Switch to Roland Vinyl Cutter
Very Basic Beginner Assembly Tutorial III: How to Use Avrdude
Very Basic Beginner Assembly Tutorial II: How to Use Gavrasm to compile an .asm flie
Very Basic Assembly Tutorial I: Where to Get Gavrasm for the Mac OS
Complete and Working --> Modified Hello Echo + Button + FTDI v.2
Modified Hello Echo + Button + FTDI v.2 ---> In Progress
Modified Hello Echo + Button + FTDI v.1
Mantis Hardware / Software Trial Run
First 3D Scans - Modela Scan of Laughing Die and Shell
Interlocking Rings - 3D Printing
MakerBot Cupcake CNC- Assembling the Plastruder mk4 Spindle
Capacitive Sensing - PuppetMaster v.1-v.2
[Revised] Fab Academy Final Project Proposal: PuppetMaster
FabISB Round 2: Stuffing and Programming the Board
Making Programming, Connector and Serial Cables
Final Project Licencing and Distribution
Internet 0 / Zero - Milling, Stuffing & Setting Up the Boards
Spindle Assembly - Mantis Milling Machine
PuppetMaster Final Project Page
Encoded Building Materials with Computer Numerical Control Assembly
Final Project Plan: PuppetMaster Universal Remote
Final project: pinball machine themed on an unfinished opera by Dylan Thomas and Stravinsky
Electronics design and production
The Fabian: an Arduino-compatible, student-friendly board for Fab Labs
Super simple bootstrap 3-axis controller
Breadboard-friendly Attiny45 board
Using a GUI to Control Processing Output with ControlIP5, Firmata via Serial
My favorite python/GTK reference
Fab ISB - Round 1: Milling Out The Board
Completed TARDIS Cast | Working Light
Archives
