November 10, 2009 4:06 PM
Lasercutting!
by Jenine Bressner
I constructed this ruffle beard from fabrics that I lasercut and hand- painted. I wear it while biking to keep my face warm.
I drew these shapes, lasercut them, and assembled them into jointed figures. The joints consist simply of short pieces of bent wire.
This is a sheet of lasercut pieces for the jointed figures. The material is matboard from a frame shop.
This is a press- fit swingset that I lasercut from 1/4" thick wood.
I drew these shapes on a computer with a mouse, which took a very long time and hurt my wrist. I am investing in a tablet so I can draw more comfortably on the computer.
Projects
- Laser Cut Cards - Construction Kit by Anna Kaziunas France
- MAKE blog post #1: Make a Press-fit Construction Kit by Shawn Wallace
- NIK by Noah Bedford
- Press-fit construction by Elliot Clapp
- Lasercutting! by Jenine Bressner
- Hey FabFolk! It's # 4 :) by Makeda Stephenson
- Sunglasses by Noah Bedford
- FabISB Round 2: Stuffing and Programming the Board by Anna Kaziunas France
- Electronics design and production by Noah Bedford
- Breadboard-friendly Attiny45 board by Shawn Wallace
- A soldering video tutorial by Jenine Bressner
- Fab ISB - Round 1: Milling Out The Board by Anna Kaziunas France
- Second article for MAKE Blog by Shawn Wallace
- Hello circuits by Elliot Clapp
- Shopbot Project - Modular Shelving by Anna Kaziunas France
- Big pile of crap by Noah Bedford
- Make something (anything) big by Makeda Stephenson
- Shelves from the Shopbot by Jenine Bressner
- Make it Big(ish) by Elliot Clapp
- Complete and Working --> Modified Hello Echo + Button + FTDI v.2 by Anna Kaziunas France
- Modified Hello Echo + Button + FTDI v.2 ---> In Progress by Anna Kaziunas France
- Modified Hello Echo + Button + FTDI v.1 by Anna Kaziunas France
- Hello Serial Echo by Anna Kaziunas France
- Hello FTDI Step Response by Anna Kaziunas France
- Making Programming, Connector and Serial Cables by Anna Kaziunas France
- Re-Programming the Echo Board by Elliot Clapp
- Persistence of Vision by Jenine Bressner
- Completed TARDIS Cast | Working Light by Anna Kaziunas France
- TARDIS: Moldmaking by Anna Kaziunas France
- 3-D modeling for molding and casting by Jenine Bressner
- Molding and casting a flexible coupling part 2 by Noah Bedford
- Molding and casting a flexible coupling by Noah Bedford
- Monkeys on typewriters by Shawn Wallace
- Molding and casting by Makeda Stephenson
- Moon Crater by Elliot Clapp
- TARDIS: 3D Modeling by Anna Kaziunas France
- Very Basic Beginner Assembly Tutorial III: How to Use Avrdude by Anna Kaziunas France
- Very Basic Beginner Assembly Tutorial II: How to Use Gavrasm to compile an .asm flie by Anna Kaziunas France
- Very Basic Assembly Tutorial I: Where to Get Gavrasm for the Mac OS by Anna Kaziunas France
- Final Project Plan: PuppetMaster Universal Remote by Anna Kaziunas France
- New bazaar tutorial by Noah Bedford
- Intro to Bazaar by Noah Bedford
- First 3D Scans - Modela Scan of Laughing Die and Shell by Anna Kaziunas France
- Interlocking Rings - 3D Printing by Anna Kaziunas France
- MakerBot Cupcake CNC- Assembling the Plastruder mk4 Spindle by Anna Kaziunas France
- Half drill bit! by Noah Bedford
- F(l)uxamascanner by Elliot Clapp
- Picza by Noah Bedford
- Capacitive Sensing - PuppetMaster v.1-v.2 by Anna Kaziunas France
- Hello FTDI Step Response by Anna Kaziunas France
- Levitating Elephant by Noah Bedford
- Servo motor mosh by Jenine Bressner
- Motion Sensing Glow Skull by Anna Kaziunas France
- The Gellerizer by Elliot Clapp
- Processing by Jenine Bressner
- Levitating Elephant by Noah Bedford
- Using a GUI to Control Processing Output with ControlIP5, Firmata via Serial by Anna Kaziunas France
- Pure Data Frequency Modulator by Elliot Clapp
- DIY hobo game controllers by Shawn Wallace
- My favorite python/GTK reference by Noah Bedford
- Internet 0 by Jenine Bressner
- Internet 0 / Zero - Milling, Stuffing & Setting Up the Boards by Anna Kaziunas France
- XBee Networking by Elliot Clapp
- XBee Networking by Elliot Clapp
- Mantis Hardware / Software Trial Run by Anna Kaziunas France
- Spindle Assembly - Mantis Milling Machine by Anna Kaziunas France
- The Mantis by Shawn Wallace
- Machine button interface by Shawn Wallace
- Super simple bootstrap 3-axis controller by Shawn Wallace
- Diploma Completion Checklist Update - 08.14.2010 by Anna Kaziunas France
- Final Project Licencing and Distribution by Anna Kaziunas France
- Final Project Plan: PuppetMaster Universal Remote by Anna Kaziunas France
- Licensing by Noah Bedford
- Puppet Master Final Project Page Updated by Anna Kaziunas France
- [Revised] Fab Academy Final Project Proposal: PuppetMaster by Anna Kaziunas France
- The world is broken by Noah Bedford
- Final project notes by Noah Bedford
- Final project progress by Noah Bedford
- Puppet Master Final Project Page Updated by Anna Kaziunas France
- Unsuccessful Modela Troubleshooting - Partially Successful Switch to Roland Vinyl Cutter by Anna Kaziunas France
- Capacitive Sensing - PuppetMaster v.1-v.2 by Anna Kaziunas France
- [Revised] Fab Academy Final Project Proposal: PuppetMaster by Anna Kaziunas France
- Final Project Licencing and Distribution by Anna Kaziunas France
- PuppetMaster Final Project Page by Anna Kaziunas France
- Encoded Building Materials with Computer Numerical Control Assembly by Makeda Stephenson
- Final Project Plan: PuppetMaster Universal Remote by Anna Kaziunas France
- Towards the final project by Jenine Bressner
- Final project notes by Noah Bedford
- Final Project Progress by Elliot Clapp
- Servo motor mosh by Jenine Bressner
- Working outside the lab, but making progress by Jenine Bressner
- Year-long Project by Elliot Clapp
- Coil wrapping machine by Shawn Wallace
- On Self-Replication by Anna Kaziunas France
- FTDI header for .cad by Noah Bedford
- Tintin Rocket (neko-wa kowaii) by Noah Bedford
- Fluxamacutter press-fit DIY vinyl cutter by Shawn Wallace
- Lasercutting! by Jenine Bressner
- Kamina glasses by Noah Bedford
Links
Recent entries
Puppet Master Final Project Page Updated
Shopbot Project - Modular Shelving
Diploma Completion Checklist Update - 08.14.2010
Unsuccessful Modela Troubleshooting - Partially Successful Switch to Roland Vinyl Cutter
Very Basic Beginner Assembly Tutorial III: How to Use Avrdude
Very Basic Beginner Assembly Tutorial II: How to Use Gavrasm to compile an .asm flie
Very Basic Assembly Tutorial I: Where to Get Gavrasm for the Mac OS
Complete and Working --> Modified Hello Echo + Button + FTDI v.2
Modified Hello Echo + Button + FTDI v.2 ---> In Progress
Modified Hello Echo + Button + FTDI v.1
Mantis Hardware / Software Trial Run
First 3D Scans - Modela Scan of Laughing Die and Shell
Interlocking Rings - 3D Printing
MakerBot Cupcake CNC- Assembling the Plastruder mk4 Spindle
Capacitive Sensing - PuppetMaster v.1-v.2
[Revised] Fab Academy Final Project Proposal: PuppetMaster
FabISB Round 2: Stuffing and Programming the Board
Making Programming, Connector and Serial Cables
Final Project Licencing and Distribution
Internet 0 / Zero - Milling, Stuffing & Setting Up the Boards
Spindle Assembly - Mantis Milling Machine
PuppetMaster Final Project Page
Encoded Building Materials with Computer Numerical Control Assembly
Final Project Plan: PuppetMaster Universal Remote
Final project: pinball machine themed on an unfinished opera by Dylan Thomas and Stravinsky
Electronics design and production
The Fabian: an Arduino-compatible, student-friendly board for Fab Labs
Super simple bootstrap 3-axis controller
Breadboard-friendly Attiny45 board
Using a GUI to Control Processing Output with ControlIP5, Firmata via Serial
My favorite python/GTK reference
Fab ISB - Round 1: Milling Out The Board
Completed TARDIS Cast | Working Light
Archives
